The Vanco HDBT4X3 is a professional HDBaseT matrix switcher that consist of the following inputs and outputs: 4 HDMI in (4Kx2Kat60Hz signal at max), 3 IR in, 1 IR eye, 4 IR out, 3 HDBaseT out, 1 HDMI out, 1 SPDIF out, 1 LCR RCA out, and TCP/IP, RS232 control port via Phoenix connector.
The HDBaseT receiver is an HDBaseT receiver that consists of the following inputs and outputs, 1 HDBaseT in, 1 IR in, 1 IR out and HDMI out. The receiver is powered directly by the matrix switcher. All HDMI inputs can be selected by either the front panel buttons, IR, RS 232 or GUI. The selected source is delivered to HDBaseT zoned outputs 13 & HDMI output. The matrix switcher is capable of delivering 4K signals up to 40M, 1080p up to 70M and powering the receivers via a single cat5e cable. It is however recommended to use good quality Cat6 cable. This matrix switcher also supports EDID management and is HDCP 2.2, 1.4 compliant. Audio sources can be selected via RS232 commands and TCP/IP at the matrix switcher or by 3rd party control.